TESTSEALABS COVID-19 ANTIGEN TEST CASSETTE (NASAL SWAB) 25 TEST/BOX
Testsealabs®COVID-19 Antigen Test Cassette is a rapid chromatographic immunoassay for the qualitative detection of COVID-19 antigen in nasal swab specimen to aid in the diagnosis of COVID-19 viral infection.
Rapid results: Within 15 minutes
High performance: 95.1% sensitivity, 100% specificity
Simple operation: No equipment needed
Product certification: EU CE certification, TÜV SÜD certification, ISO 13485:2016
**Offer cannot be used in conjunction with any promotional offers (discounts or gifts)
Insert mini tip swab through the nostril parallel to the palate until resistance is encountered or the distance is equivalent to that from the ear to the nostril of the patient, indicating contact with the nasopharynx. Swab should reach depth equal to distance from nostrils to outer opening of the ear. Gently rub and roll the swab. Leave swab in place for several seconds to absorb secretions. Slowly remove swab while rotating it. Specimens can be collected from both sides using the same swab, but it is not necessary to collect specimens from both sides if the mini tip is saturated with fluid from the first collection. If a deviated septum or blockage creates difficulty in obtaining the specimen from one nostril, use the same swab to obtain the specimen from the other nostril.Allow the test, specimen, buffer and/or controls to reach room temperature 15-30℃ prior to testing. 1. Place the Extraction Tube in the workstation. Hold the extraction reagent bottle upside down vertically. Squeeze the bottle and let the solution drop into the extraction tube freely without touching the edge of the tube. Add 10 drops of solution to the Extraction Tube.2. Place the swab specimen in the Extraction Tube. Rotate the swab for approximately 10 seconds while pressing the head against the inside of the tube to release the antigen in the swab.3. Remove the swab while squeezing the swab head against the inside of the Extraction tube as you remove it to expel as much liquid as possible from the swab. Discard the swab carefully.4. Cover the tube with cap. Then add 3 drops of the sample into the sample hole vertically.5. Read the result after 15 minutes. If left unread for 20 minutes or more the results are invalid and a repeat test is recommended.